| Article number: | E6-Oring-0004 |
| Availability: | Out of stock |
| Delivery time: | Feel free to contact us about the delivery time when products are out of stock |
- 70% Nitrile 30% Rubber
- Replacement O Ring
- QTY 5 Per Pack
Product Information -
We have measured the original tm o rings and determined the size 1x2MM to be the optimum sized replacement. We are happy to share this information this is a common part which can be ordered from the internet or local shops, but for your conveince we have got some instock and created this listing. Unfortunately tokyo marui do not supply this as a separate original part.
QTY 5 Per Pack
Installation Advise -
When refitting you can apply a little silicon oil to protect the rubber thats in the o ring from deterioration over time. When you press the base on you will find it requires a large amount of pressure to compress the base and line up the pin holes. Two people doing this is recommended so as to not damage the pin holes or pins if they are miss aligned. Its a common misconception that it is greases or ptfe that for the seal, this is the job of the o ring to be trapped in place and form the tight seal, its physically squished, which is why the original o ring you removed looks dented and deformed.
Because all brands have different dimensions we can only confirm this to be a 100% fit for the Tokyo Marui Guns listed below unless specifically stated otherwise.
Confirmed To Fit -
All Tokyo Marui Entry Valves (Both Long and Short Neck Versions)
Tokyo Marui - M4 MWS Gas BlowBack Rifle Series
Tokyo Marui - M870 Tactical Gas Shot Gun Series
Tokyo Marui - G-Series 17 Gas BlowBack Pistol Series
Tokyo Marui - G-Series 18-C Gas BlowBack Pistol Series
Tokyo Marui - G-Series 26 Gas BlowBack Pistol Series
Tokyo Marui - G-Series 26 Advanced Gas BlowBack Pistol Series
Tokyo Marui - G-Series 34 Gas BlowBack Pistol Series
Tokyo Marui - P226-R Advanced Gas BlowBack Pistol Series
Tokyo Marui - P226E2 Gas BlowBack Pistol Series
Tokyo Marui - TMMP7A1 (Black) Gas Sub Machine Gun Series (Fits but is recessed by an extra 3mm)
Tokyo Marui - TMMP7A1 (Tan) Gas Sub Machine Gun Series (Fits but is recessed by an extra 3mm)
This list is very long and will take us some time to full test all guns so please assume that there may well be others missing from this list since this product is so wide fitting.